PluginDocumentation

There is an example 'plugin' that demonstrates how to use the plugin interface in Torque here: [[1]] - this is a basic example, have a look at the AIDL file for the API documentation

There is a forum post here: [[2]] that explains some more about plugin development

Here is a list of the extended information Torque provides which your plugin can call on, or you can use for custom themes:

Identifier	Description
0xff1005	GPS Longitude
0xff1006	GPS Latitude
0xff1001	GPS Speed
0xff1010	GPS Height
0xff1007	GPS Bearing
0xff1201	MPG
0xff1202	Turbo Boost
0xff1203	Kilometers Per Litre
0xff1205	Trip MPG
0xff1206	Trip KPL
0xff1207	Litres per Kilometre
0xff1208	Trip LPK
0xff120A	Manifold Vacuum
0xff120B	GPS Trip distance
0xff120C	Vehicle distance (Odometer) saved with profile
0xff1220	Accelerometer (X)
0xff1221	Accelerometer (Y)
0xff1222(	Accelerometer (Z)
0xff1223	Accelerometer (Total)
0xff1225	Torque
0xff1226	Horsepower
0xff122d	0-60 mph time
0xff122e	0-100 kph time
0xff122f	Quarter mile time
0xff1230	eighth mile time
0xff1237	GPS vs OBD speed diff
0xff1238	Voltage
0xff1239	GPS Accuracy
0xff123A	GPS Satellites locked
0xff123B	GPS bearing
0xff1249	AFR
0xff1214->ff121B	O2 Sensors 1x1->1x4, 2x1->2x4
0xff1240->ff1247	O2 Eqv Ratio 1->8
0xff1257	CO2 in G/KM
0xff1258	CO2 in G/KM average
0xff125a	Fuel rate
0xff125b	Fuel cost (trip)
0xff125c	Fuel used (trip)
0xff1255	Torque RPM component
0xff1256	HorsePower RPM component
0xff124d	Commanded AFR
0xff1249	Measured AFR

Extended PIDs are as shown by their 'PID' in the PID editor (Settings->Manage extended PIDs->tap on a PID for more information)