Difference between revisions of "USB"
From Torque Wiki
⧼monobook-jumptonavigation⧽⧼monobook-jumptosearch⧽ (Created page with 'Torque now supports USB connections (requires Android 3.1 (Honeycomb) or higher To use USB in Torque, do the following: * Make sure Torque is quit and not running. * Plug the …') |
(No difference)
|
Revision as of 16:49, 27 November 2011
Torque now supports USB connections (requires Android 3.1 (Honeycomb) or higher
To use USB in Torque, do the following:
- Make sure Torque is quit and not running.
- Plug the USB adapter into the tablet. A window will pop up asking which app you would like to start for this USB device. Select 'Torque'.
- Torque will start, go into the OBD settings. Change the connection type to 'Wired(USB)'. Then scroll down the USB settings and select the USB device. It should appear as a number in the list.
- Quit Torque, unplug the device, then re-plug it in. The app will start (select it to start by default from the list) and then it should automatically connect to the USB OBD adapter.
